Pay in installments of $7.16 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jun 28 - Jul 3
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
inflatable event tent Custom Inflatable Dome Tents: Elevate Every EventProduct Overview Custom inflatable canopy tent in 10x10, 16x16, and 20x20 footprints. The dome silhouette reads at distance in a way a square canopy does not. Print runs on both the exterior canopy and the interior ceiling. 300D ripstop polyester, sealed air design, 3 year warranty. Starting at $2,169. Before you order: initial inflation requires a 3 prong 120V outlet for 10 to 20 minutes. If your primary venues are open fields without outlet access,
Product Overview
Custom inflatable canopy tent in 10x10, 16x16, and 20x20 footprints. The dome silhouette reads at distance in a way a square canopy does not. Print runs on both the exterior canopy and the interior ceiling. 300D ripstop polyester, sealed-air design, 3-year warranty. Starting at $2,169.
Before you order: initial inflation requires a 3-prong 120V outlet for 10 to 20 minutes. If your primary venues are open fields without outlet access, confirm power availability before ordering.
Inflates once. Holds all day.
The sealed-air tube structure reaches full pressure in 10 to 20 minutes, then the blower disconnects. No continuous power required. The dome holds inflation through a full event without sagging or pressure loss under normal conditions.
Print runs inside and out.
Dye sublimation prints across the full exterior canopy and the interior ceiling fabric, so visitors inside look up at a branded surface rather than plain white. Pantone color matching included. The dome reads consistent with your other MVP Visuals products.
300D ripstop construction.
Ripstop weave means a small puncture or surface scuff does not propagate, and a repair patch kit ships with every dome. The most common field issue is a loose connector seal. When that happens, pressure drops gradually rather than suddenly, which gives you time to locate and reseal it before it affects your event.
Connect multiple domes.
A joining cloth bridges two dome openings into a continuous covered structure. A single dome covers a sponsor position or sideline spot. Pair two for a finish line corridor, or scale up to six for a full race village footprint.
No minimums. Free layouts. Free proofs.
Order one dome or a fleet. Digital proofs show how your artwork maps to the curved surface before anything prints. Approve or request changes. Nothing runs until you sign off.
Configure Your Dome
Four decisions: size, walls, awning, and leg color.
Size
| Size | Interior Space | Best For |
|---|---|---|
| 10x10 | 1-2 staff, single footprint | Sponsor tent, sideline position, sampling station |
| 16x16 | 4-6 people, hospitality or staffed booth | Brand activations, race finish setups, multi-use events |
| 20x20 | Large gathering, product launch space | Race village anchor, multi-brand hospitality, entry features |
Walls, Awning & Legs
| Option | What It Does |
|---|---|
| 1, 2, or 3 side walls | Printed panels that enclose part of the perimeter. Single-sided prints the exterior face. Double-sided prints both faces for corridor and center-aisle setups where the reverse is customer-facing. |
| Awning | Extends the front opening as a covered entry arch. Adds a branded surface above the entrance and reads well at approach angle. Common on race finish and entry gate setups. |
| Stock black legs | Ships standard with every dome. No upcharge. |
| Custom-color legs (+$400) | Legs printed to match your brand palette. Most useful when the dome is a centerpiece activation or when ordering multiple domes that need to read as a unified installation. |
What's Included
| Item | Details |
|---|---|
| Air blower | [VERIFY: 250W or 600W] — runs for initial inflation, then disconnects |
| Carry bag | For transport and storage between events |
| Ropes, stakes & D-rings | Ground anchoring on grass and hard surfaces |
| Repair patch kit | Field repairs for punctures and connector seals |
For multi-dome configurations, use the quote form at the bottom of the page. Include your target footprint and event date.
Frequently Asked Questions
Do I need power running to the dome all day?
No. The blower runs for the initial inflation (10 to 20 minutes), then disconnects. The dome holds pressure independently for the rest of the event. You only need outlet access during setup, not throughout the day. An outdoor extension cord to a venue outlet is enough for most setups.
Inflatable dome or traditional canopy: how do I decide?
Traditional pop-up canopy tents set up in 5 to 10 minutes with no power and handle a 40-event season without issue. They're the right product for most trade shows, markets, and general event setups at $500 to $2,000 fully printed. The inflatable dome is right when the tent itself is part of the activation: when the dome silhouette, the interior branded environment, or the multi-dome footprint are part of what you're selling to attendees or sponsors.
How many people does setup take?
Two people for a 10x10. The 16x16 and 20x20 are more comfortable with three people, mostly because of carry bag weight and the staking process. No poles, no connectors, no hardware assembly. Unpack, stake the base, inflate, done.
What happens if the dome loses pressure during an event?
Most pressure loss comes from a loose connector seal rather than fabric failure. When that happens, pressure drops gradually over the next 30 to 60 minutes, not suddenly. That gives you time to find the source, reseal it, and get back to your event without a crisis. A patch kit and sealing instructions are included.
How does my logo look on a curved surface?
The dome canopy curves, so artwork wraps a 3D surface rather than lying flat. The digital proof we send before production shows exactly how your design maps to the curve from every angle. Most operators use full-bleed brand color with a centered logo scaled to read clearly across the arch. Complex multi-element designs sometimes need adjustments for the curved template. We flag any issues in the proof before anything runs.
Can I connect two domes together?
Yes. A joining cloth bridges adjacent dome openings into a continuous covered structure. Joining cloth sizing depends on the specific dome combination and isn't a standard product page variant. Contact us or use the quote form with your target footprint dimensions and we'll spec it.
What does the warranty cover?
The 3-year warranty covers manufacturing defects: seam failures, zipper failures, and material defects from production. It does not cover puncture damage, high-wind damage beyond rated conditions, or damage from improper storage. The blower carries a separate 1-year manufacturer warranty.
Will I see a proof before production?
Yes. The proof shows your artwork across the exterior canopy, interior ceiling, awning (if included), and leg panels. Approve or request changes. Nothing runs until you sign off.
How long does production and delivery take?
Production runs 6 to 8 business days after artwork approval. Delivery runs 5 to 7 business days. For multi-dome builds or event-specific timeline questions, reach out before ordering and we'll confirm whether the schedule works.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.2 ★★★★★
Based on 1254 reviews
Sort
Product Reviews
★★★★★ 5
Awesome Book
Format: Paperback
Very useful book. It was exactly what I was looking for.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 8, 2025
★★★★★ 5
Just what I was looking for
Format: Paperback
Good
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 17, 2025
★★★★★ 4
Figures are wrong in the Kindle version
Format: Kindle
Through Chapter 11 so far and the Figures are frequently very wrong. There seem to be a couple other minor errors, but this desperately needs an update for the Kindle version. Content otherwise seems good so far, so hope this gets fixed.
Update: Just after I entered this, the figures seem to have been updated. Checked 4 and all are fixed, so moved the rating up one and will update when through all chapters.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 22, 2023
★★★★★ 5
The best python data science book.
Format: Paperback
Covers all the essentials very clearly.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 15, 2023
★★★★★ 5
Amazing quality!
Format: Paperback, Format: Paperback
Excellent condition! Highly recommend this seller 10/10
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 16, 2025